Limitations of Use

EnduraPanel should not be used in a submerged or constant high-humidity application. 

EnduraPanel should not be used in place of bracing systems or installed where full internal linings are not in place. 

When used as a whiteboard, EnduraPanel can, in conditions of extended and excessive air conditioning (extreme low humidity), leave ‘ghosting’ (depending on time of exposure and formulation of ink). In most cases this can be removed with either methylated spirits or isopropyl alcohol. 

The recommended general operating temperatures of EnduraPanel are 10ºC - 60ºC.

EnduraPanel is not recommended for use immediately behind a heat source. 

EnduraPanel jointing systems are only recommended for use in wet areas when installed in accordance with instructions contained herein.